User guide

11
Description
Changing cover
Turn the phone back and push lock button upwards.
Remove the back cover by lifting bottom end first.
Lift the front cover in same way as the back cover.
Remove panel (electronic card).
Insert the panel into the front cover.
Do as above to replace the back cover.
Push button back into locked position (downwards).
Reassembling the keypad in case of involuntary removing
First insert the two clips of the lower part of the keypad (1) then set it up
inserting the two side clips (2).
Sometimes, it may be necessary to remove the keypad and set it again
if it moved after a fall.
2
1
3
4
5
6
1
2
3
4
5
6
1
2
251779049_SG341i_lu_en.book Page 11 Mardi, 16. novembre 2004 9:11 09