User guide

Setting your machine
3-21
Date en cours : 31 mars 2004
\\Sct01002\BE31-DOC\DOC 31 - En cours\Travaux en cours\Fax\MFF\MFF 251 444 159A_LU MFF SMS Sagem GB version 2\Configuration
GB.fm
• If SMS appears, then the SMS has been put on hold and a further attempt will take place a
couple of minutes later. To immediately execute or cancel transmission, refer to paragraph
Transmission waiting queue, page 5-11.
• To check the SMS has been sent properly, you may print the transmission/reception log
(
52 OK - PRINT /LOGS, p. 2-7).
ERASE AN SMS
Proceed as follows to erase an SMS:
43 OK - SMS SERVICE / DELETE SMS
 Select the messages to erase.
431 OK - SMS SERVICE / DELETE SMS / SELECTION
 Select SELECTION using keys  and  and validate with OK key.
 Select a message using keys  and  and validate with OK key.
 Erase messages already read
432 OK - SMS SERVICE / DELETE SMS / SMS READ
 Select MESSAGES READ using keys and  and validate with OK key.
 Confirm with OK key.
 Erase all messages from memory.
433 OK - SMS SERVICE / DELETE SMS / ALL
 Select ALL using keys and  and validate with OK key.
 Confirm with OK key.
 Select ALL using keys and and validate with OK key.
 Confirm with OK key.
SMS RECEPTION
SMS messages received are automatically printed (you can modify this setting with 451 OK
Auto print). If you disable automatic printing, the messages are automatically stored in the
memory.
SMS read
 Access by menus:
42 OK - SMS SERVICE / READ SMS
• Direct access