Technical information

Proc Sheet 0 05
MyX-4
REMOVING / REPLACING THE KNOB
LOCK AND THE LOCKER
1/2
Ref. SCT U33 SM DTS 004– Index A - 29/03/01 Page 5-15
Tools :
- Not applicable
Preliminary operation
1. Remove the back cover ( Proc sheet 0 01).
Removal procedure :
1. Push the knob lock (2) upward.
2. Pull out the knob lock (2).
3. In the internal cover side, slide the locker (3) upward, while lifting it.
Placement procedure :
1. Place the knob lock (2) in its housing, then slide it downward.
2. Turn the rear cover upside down and press the knob lock firmly.
Further operations :
1. Replace the back cover (Proc sheet 0 01).