Technical information


Proc Sheet 0 04
MyX-4
REMOVING / REPLACING THE ELASTOMER
KEYPAD
1/2
Ref. SCT U33 SM DTS 004– Index A - 29/03/01 Page 5-13
Tools :
- Flat screwdriver
Preliminary operation
1. Remove the back cover ( Proc sheet 0 01).
2. Remove the front cover ( Proc sheet 0 03).
Removal procedure :
1. Remove the elastomer keypad (2) from the front cover (1).
Placement procedure:
1. Clean the elastomer keypad (2) with compressed air.
2. Place the elastomer keypad (2) in position in its housing
Further operations :
1. Replace the front cover (Proc sheet 0 03).
2. Replace the back cover (Proc sheet 0 01).