Technical information


Proc Sheet 0 03
MyX-4
REMOVING / REPLACING THE FRONT COVER
1/2
Ref. SCT U33 SM DTS 004– Index A - 29/03/01 Page 5-11
Tools :
- Not applicable
Preliminary operation :
1. Remove the back cover ( Proc sheet 0 01).
Removal procedure :
1. Separate the two front cover (2) fixing stop pins (3) to release the electronic module (1).
2. Remove the equipped front cover (2).
3. Remove the elastomer keypad (4).
Placement procedure :
1. On the new front cover (2), position the elastomer keypad (4) in position, ensuring it is free of dust.
2. Place the module (1)onto front cover (2) ,engaging firstly the module top, then press on the module top
(1)
Further operations
1. Place the back cover (Proc sheet 0 01).