Technical information


Proc Sheet 2 03
myC-3/ myC-3b
REMOVING / REPLACING THE MICROPHONE
1/2
________________________________________________________________________________________________
Ref. SCT U38 SSC DTS 0020 – Index A - May 4, 2004 Page 5-42
4.71 Tools :
- Cross shaped screwdriver
- Soldering iron
- Solder wick
4.72 Preliminary operation
4. Remove the battery ( Proc sheet 0 01).
5. Remove the back cover ( Proc sheet 1 01).
6. Remove the equipped electronic board ( Proc sheet 1 06).
4.73 Removal procedure :
1. Unsolder the microphone (2) from the equipped electronic board (1)
2. Remove the microphone (2)
4.74 Placement procedure :
1. Flux the place of the microphone (2) and solder on the equipped electronic board (1), respecting the
wiring sense ( Flex PCB upward )
4.75 Further operations :
4. Replace the equipped electronic board ( Proc sheet 1 06).
5. Replace the back cover ( Proc sheet 1 01).
6. Replace the battery pack ( Proc sheet 0 01).