Technical information


Proc Sheet 1 03
myC-3/ myC-3b
REMOVING / REPLACING KEYPADS AND SIDE
DECOR
1/2
________________________________________________________________________________________________
Ref. SCT U38 SSC DTS 0020 – Index A - May 4, 2004 Page 5-17
4.26 Tools :
- Cross shaped screwdriver
4.27 Preliminary operation
1. Remove the battery pack ( Proc sheet 0 01).
2. Remove the back cover ( Proc sheet 1 01).
4.28 Removal procedure :
1. Lift equipped electronic board up to liberate it of the front cover (1)
2. Remove the keypad (2), the side keys (3) and the side decor (4) from the front cover (1).
4.29 Placement procedure:
1. Clean the keypad (2) and side keys (3) with compressed air.
2. Place the keypad (2) and side keys (3 ) in position in its housing
3. Place the side decor (4) in its housing
4. Place the equipped electronic board in its housing
4.30 Further operations:
1. Replace the back cover ( Proc sheet 1 01).
2. Replace the battery pack ( Proc sheet 0 01).