Technical information

 Site Technical Documentation –myC-3/ myC-3b
Ref. SCT U38 SSC DTS 0020 – Index A - May 4, 2004 Page 5-1
Test description
This test tests myC-3/ myC-3b phones during a call.
Required tools
− A Wavetek
− A RF coupler
− A myC-3/ myC-3b calibration tool
−
Test procedure
1. Position the calibration tool first on the RF coupler to calibrate it
2. Position the myC-3/ myC-3b module on the RF coupler
3. Switch the Wavetek on and press on "AUTOTEST".
4. Choose the corresponding program using the "UP" and "DOWN" arrows.
Mobile :myC-3/ myC-3b
Frequency range : GSM, DCS or GSM/DCS,
Coupling type : ANTENNA.
5. Press on "ENTER" and wait until the end of the calibration.
6. Follow the instructions shown on the Wavetek.