User guide

32 WAP
Configuring WAP parameters
Select the Advanced… menu, then the Settings menu.
Choose from the proposed sub-menus:
Profiles is used to select or modify your access provider's logon parameters or configure the parameters of other access
providers.
The active profile is preceded with a star.
Configuration of GSM and GPRS parameters:
All information to be entered in the parameters are provided by your operator or access provider.
- Choose the access service, then press [
Options ].
- Enter the title and validate.
- Enter Internet address of home page and validate.
- Enter parameters of preferred connections:
• GSM if no GPRS
(by default): the logon to WAP services uses the GPRS as a priority. However, in the event of
unavailability of the GPRS network, the GSM network is used to establish the link.
• GPRS
: the logon to WAP services uses the GPRS network exclusively.
• GSM
: the logon to WAP services uses the GSM network exclusively.
The
GSM parameters to be entered are:
- Login
- Password
- IP address of WAP gateway
- Port type (secure or insecure)
- Dial-up number
- Mode (digital, analog or automatic)
In automatic mode access can be gained to the operator's network by a digital link and an analog link to a different network
(in roaming).
The
GPRS parameters to be entered are:
- Login
- Password
- IP address of WAP gateway
- Port type (secure or insecure)
- APN: if no APN has been defined, press the key [
Options ] then the APN menu. Select or add an APN.
Once all the settings have been entered, you can activate the chosen access provider. Select him from the list. Validate your
choice.
Linger timer is used to choose the time after which the call is automatically disconnected if you have forgotten to log off from
a service.
251970899_myC3-2_lu_en.book Page 32 Mercredi, 16. mars 2005 9:22 09