Technical information


Proc Sheet 1 05
myC-1
REMOVING / REPLACING THE VIBRATING
DEVICE
1/2
________________________________________________________________________________________________
Ref. SCT U38 SSC DTS 0016 - Index A – May 6, 2004 Page 5-21
6.33 Tools :
- A 0.6mm torx screwdriver
- Tweezers
6.34 Preliminary operation
1. Remove the battery ( Proc sheet 0 01).
2. Remove the back cover ( Proc sheet 1 01).
6.35 Removal procedure :
1. Remove, with the tweezers, the vibrating device (1) in its housing .
6.36 Placement procedure :
1. Put the vibrating device in its housing, respecting the foolproof device
6.37 Further operations :
1. Replace the back cover ( Proc sheet 1 01).
2. Replace the battery pack ( Proc sheet 0 01).
3. Carry out the radio test (Test Sheet 04).