Technical information


Proc Sheet 1 01
myC-1
REMOVING / REPLACING BACK COVER
1/2
Ref. SCT U38 SSC DTS 0016 - Index A – May 6, 2004 Page 5-13
6.13 Tools :
- A 0.6mm torx screwdriver
6.14 Preliminary operation
1. Remove the battery pack ( Proc sheet 0 01).
6.15 Removal procedure :
1. On the back cover, unscrew the four attachment screws (4) .
2. Lift delicately the back cover (1) up beginning by the lower side
3. Remove rear cover (1)
6.16 Placement procedure :
1. Replace the cover by engaging top hooks first .
2. Push down back of rear cover and screw the four attachment screws (4) with 0,25 N.m torque.
6.17 Further operations :
1. Replace the battery pack ( Proc sheet 0 01)