User manual
38 Connectivity
IMPORTANT
:
- The
Off
option ensures the best battery life for your phone.
- Bluetooth
®
security is better guarded because your phone remains invisible to the other devices.
My devices
This menu lets you draw up the list of devices with which the Bluetooth
®
connection is secure (by authentication and
encryption).
A device must be added to this list before it can be used in Bluetooth
®
with your phone except for exchanging objects. When
you select send by Bluetooth
®
(photo, Todo task, contact details, etc.) the phone displays the list of devices. You do not need
to select a device from this list at this time, you can start a one-off search for a device when you initiate sending.
See below for the pairing procedure.
My Bluetooth name
This is the name used to identify your phone when it is detected by another Bluetooth
®
device.
Pairing procedure
Select
My devices
/
New device
.
If the Bluetooth
®
function is not active, the phone prompts you to activate it using one of the 3 modes described above.
The phone searches for visible Bluetooth
®
devices and displays the list. Select the device concerned and validate your
choice. Your phone then prompts you to enter a code which must be the same as the code entered on the remote device.
Enter and validate this code: Your phone is now paired with the remote device.
A connected device is shown in blue in the list.
[
Options
] on the name of a device lets you access the following options:
-
Delete
: this is used to delete the device. WARNING: using this function needs starting the pairing over again.
-
Rename
: this is used to modify the name of the device.
-
Delete all
: this is used to delete all your devices. WARNING: using this function needs starting the pairing over again.
-
Activate
: this is used to activate the connection with the device.
-
Deactivate
: this is used to deactivate the connection with the device.
-
Properties
: this is used to display the list of the device's Bluetooth
®
services.
-
Defined as trusted
: this is used to define a device as trusted. It means that it is a device with which the user has his
complete trust because it will automatically connect to the phone without any user intervention.
Notes
:
- Refer to the user manual of the device with which you are pairing to find out how to set this device to the mode allowing
this operation.
- The code of the remote device may be predefined by the device manufacturer. In this case, refer to the user manual of this
device to find out this code.
252889386_my900C-my901C_en.book Page 38 Vendredi, 30. mars 2007 9:47 09