User manual

3-24
Setting your machine
Your SMS may be sent to only one person or to several people. To send an SMS:
• to only one person, press the key to confirm
• to several people:
- press the key and enter the next person's number,
- repeat the operations as many times as required (10 persons max.). Press the key to
confirm,
SENDING SMS is displayed as the SMS is being sent.
• If SMS appears, then the SMS has been put on hold and a further attempt will take place a couple
of minutes later. To immediately execute or cancel transmission, refer to paragraph Transmission
waiting queue, page 5-10.
• To check the SMS has been sent properly, you may print the transmission/reception log (
52
OK - PRINT /LOGS, p. 2-7).
ERASE AN SMS
Proceed as follows to erase an SMS:
43 OK - SMS SERVICE / DELETE SMS
 Select the messages to erase.
431 OK - SMS SERVICE / DELETE SMS / SELECTION
 Select SELECTION using keys  and  and validate with OK key.
 Select a message using keys  and  and validate with OK key.
 Erase messages already read
432 OK - SMS SERVICE / DELETE SMS / SMS READ
 Select MESSAGES READ using keys and  and validate with OK key.
 Confirm with OK key.
 Erase all messages from memory.
433 OK - SMS SERVICE / DELETE SMS / ALL
 Select ALL using keys and  and validate with OK key.
 Confirm with OK key.