User manual

Setting your machine
3-3
Your fax number/your name
Your fax will print out your fax number on each document it transmits if you save this number
and if the machine is set to
SENDING HEADER (refer to paragraph Technical parameters,
page 3-9).
To save your fax number and your name:
22 OK - SETUP / NUMBER / NAME
 Enter your fax number (20 digits max.) and press OK to confirm.
 Enter your name (20 characters max) then press OK to confirm.
Type of network
You may connect your fax to either a PSTN or private network such as private automatic branch
exchange (PABX). You must select the network which is the most convenient.
To select the type of network:
2511 OK - SETUP / NETWORKS / TEL. NETWORK / NETWORK TYPE
 Select option PABX or PSTN then confirm your choice with OK.
Geographical settings
These settings will enable you to use your machine in different preset countries using different
languages.
Country
By choosing a country, you initialise:
• the settings for the public telephone network,
• the language by default.
To select the country:
201 OK - SETUP / GEOGRAPHICAL / COUNTRY
 Select the required option and press the OK key to confirm.
Network
This setting enables you to individually set the type of public telephone network so that your
machine can communicate over the public network of the country you have chosen in
compliance with the applicable standards.
Remark : these settings are different from the NETWORK TYPE (p. 3-3), which allows you to choose between
public and private network.
To select the network:
202 OK - SETUP / GEOGRAPHICAL / NETWORK
 Select the required option and press the OK key to confirm.