User manual

Maintenance
6-7
 Insert chip card (supplied with the toner cartridge) into the card reader ensuring that the
chip is entered as shown in the drawing below.
 The following is displayed on the scanner control panel screen:
 Press OK.
 Once the chip card has been read, the display shows:
 Remove the card.
Caution - If the following is displayed, check that you have inserted the chip card the right way
up:
Caution - If the following is displayed, get out your card and insert it in the other way up,
following the green arrow.
CHANGE TONER ?
YES= OK - NO= C
TONER OK
REMOVE CARD
CANNOT READ CARD
REMOVE CARD
CANNOT READ CARD
CHECK WAY UP
Green arrow