User manual

Print function
6-19
Date en cours : 29 juin 2004
D:\CLIENTS\sagem\Pour dossier MFK V2\MFK V2 LU 251597054A MF3760_3780 GB\Fonction impression Gb.fm
Operation
Setting your
machine
Getting startedDirectoryMaintenanceSafety ContentsInstallationPrint function
Automatic page break
The time to wait before printing the current page, when the printer stops receiving data. The time
can be set from 0 to 495 seconds incrementing the values by 5.
MENU - - OTHERS - > - - PAGE BREAK
 Press ENTER, a blinking cursor appears underneath the units figure.
 Set the time using the and buttons to increment or decrement the selected figure and
the < and > buttons to move to the tens and hundreds.
 Press ENTER to confirm.
Standby mode
Switching standby mode on and off
MENU - - OTHERS - > - - ENTER STANDBY MODE > STANDBY MODE
 Press ENTER, a blinking "?" appears on the left of the current status.
 Select the option (ON or OFF) using the and keys. Press ENTER.
Setting the time before entering standby mode
The time before entering standby mode is between 5 and 240 minutes in 5-minute steps.
MENU - - OTHERS - > - - ENTER STANDBY MODE
 Press ENTER, a blinking cursor appears underneath the units figure.
 Set the time before entering standby mode using the and buttons to increment or
decrement the selected figure and the < and > buttons to move to the tens and hundreds.
 Press ENTER to confirm.
Reinitialising the printer
The printer's settings are restored to their default values.
MENU - - OTHERS - > - - INITIALISE THE PRINTER
 Press ENTER twice, the first time to choose and the second to confirm your choice.
The S
ELF TEST message appears on the screen during reinitialisation.
Resource protection
This setting prevents you from losing any fonts and macros you have downloaded when going
from PCL6 to another emulation.
MENU - - OTHERS - > - - PROT. RESOURCES
 Press ENTER, a blinking "?" appears on the left of the current status.