User manual

Print function
6-11
Date en cours : 29 juin 2004
D:\CLIENTS\sagem\Pour dossier MFK V2\MFK V2 LU 251597054A MF3760_3780 GB\Fonction impression Gb.fm
Operation
Setting your
machine
Getting startedDirectoryMaintenanceSafety ContentsInstallationPrint function
Selecting the source tray
This menu allows you to select the source tray to be used for a print job. If no options are installed,
only tray 1 and the M
ULTI tray are available. If additional trays are installed, they will appear on
the list.
MENU - - PAPER MANAGEMENT - > - - PAPER SOURCE
 Press ENTER, a blinking "?" appears.
 Select TRAY 1 (or TRAY 2, etc., depending on option) or MULTI TRAY using the and
keys. Press E
NTER. Selecting the paper output tray
Selecting the paper output tray
This menu allows you to choose the paper output tray when printing.
MENU - - PAPER MANAGEMENT - > - - STACKER
 Press ENTER, a blinking "?" appears.
 Select BC SP F-TO BOTTON (output at the top) or TRAY ABOVE FABOVE (output at the
rear) using the and keys. Press E
NTER.
Printing Letter documents in A4 format
This menu allows you to turn the difference between A4 format and Letter format on and off.
When set to Off this prevents printing if the size of the paper in the paper source does not match
the paper size used for the print jobs. If this size is different, an error message is displayed on the
screen. The default setting of On forces printing even if the size of the paper in the paper source
does not match the paper size used for the print jobs.
MENU - - PAPER MANAGEMENT - > - - A4/LT PRIORITY
 Press ENTER, a blinking "?" appears.
 Select ON or OFF using the or keys. Press ENTER.
PAGINATION
The following settings can be made:
• emulation,
•font,
•code set,
• number of copies,
• page orientation,
• KIR (image antialiasing),
• draft mode,
• resolution.