User manual

6-6
Contents
Date en cours : 29 juin 2004
D:\CLIENTS\sagem\Pour dossier MFK V2\MFK V2 LU 251597054A MF3760_3780 GB\Fonction impression Gb.fm
If the selected paper does not match the paper in the tray, the document will not be printed out onto the
right paper size when automatically selected by the application software (printer driver).
Setting the paper size for the tray
Use the following procedure to set a standard paper size (A5, A4, B5, Letter and Legal (for the USA.))
for the tray.
For more details about the paper formats which can be used please see the "Printing technical guideline"
documentation.
If you wish to use a non-standard paper size, please see the paragraph on Custom paper size, on page
6-6.
 Set the paper size indicator on the front of the tray.
 Set the guides and the stop inside the tray according to the paper you will be using. Load the
paper into the tray. Please see the paragraph on Loading paper, on page 1-25 for more details.
Custom paper size
Formats other than A5, A4, B5, Letter and Legal (for the USA) can be used in the tray, in this case
please following the procedure below. If an additional tray is installed, the procedures for making
settings remain the same.
This menu appears when the tray's paper size indicator is set to OTHER.
Set the paper size indicator to OTHER and configure the menu:
MENU - - PAPER MANAGEMENT - > - TRAY SIZE
 Press ENTER, a blinking "?" appears.
 Press the and keys to choose the desired format. The following formats are available:
 Press ENTER. If the selected size is Specific, you may need to set the paper dimensions and the
measurement unit.
• Specific • Oficio II • Folio • 16k
• C5 • A5 • B5 • ISO B5
• A4 • Executive • Lettre • Legal