User manual

Operation
5-15
Date en cours : 9 février 2005
C:\Documents and Settings\G097447\Bureau\MFK V2 LU 251 816 433A MF 3725 GB\Utilisation Gb.fm
Operation
Setting your
machine
Getting startedDirectoryMaintenanceSafety ContentsInstallationPrint function
 Validate by pressing the OK key.
855 OK - ADVANCED FCT / SCAN. & PRINT / FLATBED MARG
If you want to offset the side margins of your document to the left or to the right when scanning
with your flat scanner:
 Adjust the offset of the left/right margins (in 0.5mm steps mm) using keys  and .
 Validate by pressing the OK key.
OTHER FUNCTIONS
LOGS
The incoming and outgoing logs list the last 30 transmissions (incoming and outgoing) made by
your machine.
An automatic print out will take place after every 30 transmissions. However, you may request a
print out at any time.
Each log (incoming or outgoing) contains a table with the following information:
• date and time of the incoming or outgoing document
• subscriber’s number or E-mail address
• transmission mode (Norm, Fine, SFine or Photo)
• number of pages sent or received
• call duration
• incoming or outgoing results: noted
CORRECT if properly transmitted
• reason for call error
To print the logs:
52 OK - PRINT / LOGS
The incoming and outgoing logs are printed on the same page.
PRINTING THE FUNCTIONS LIST
You may print the functions list of your fax machine at any time.
To print the functions list:
51 OK - PRINT / FUNCTIONS LIST