User manual
Setting your machine
3-15
Date en cours : 9 février 2005
C:\Documents and Settings\G097447\Bureau\MFK V2 LU 251 816 433A MF 3725 GB\Configuration Gb.fm
SommaireInstallation
Operation
Setting your
machine
Getting startedDirectoryMaintenanceSafety ContentsInstallationPrint function
Standard settings
Your machine has two types of settings that let you define:
• The type and frequency of the connection to your ISP.
• Type of transmission over the Internet.
At any moment you may print the settings of your machine to know their status.
Selecting the connection type
941 OK - INTERNET / SETTINGS / CONNEC. TYPE
Select one of the connection options among SET TIMES, PERIODIC or ON DEMAND and
press OK to confirm.
Selecting the transmission type
942 OK - INTERNET / SETTINGS / SEND TYPE
Select one of the send options IMMEDIATE or DURING CNX then press OK to validate.
Changing the connection period (PERIODIC type)
943 OK - INTERNET / SETTINGS / PERIOD
With the PERIODIC mode, enter the new connection period by means of the numerical
keypad (between 00:01 am and 11:59 pm) and press OK to confirm.
An Internet connection will be established every three hours (default value).
Changing the connection hours (PUNCTUAL type)
943 OK - INTERNET / SETTINGS / PERIOD
With the PUNCTUAL mode, use the or navigator arrows to position the cursor under
the digit that needs to be changed. Enter the new hour(s) period by means of the numerical
keypad (between 00:01 am and 11:59 pm) and press OK to confirm.
SET TIMES
an Internet connection is established every day at
9:00 am, 12:30 am and 5:00 pm
A
A. To avoid Internet access saturation, the automatic connection will occur in reality 12 minutes,
give or take, around the requested time.
PERIODIC
an Internet connection is established every 3 hours
1
.
(default value)
ON DEMAND
an Internet connection is established at your request by
IMMED. ACCESS (please see the paragraph on Network
Connection, page 3-17)
IMMEDIATE
document transmission will occur immediately at each
transmission request
DURING
CONNECTIONS
transmissions will only occur at programmed connections
SET TIMES or PERIODIC TYPE