User manual

Getting started

2-9

Date en cours : 9 février 2005

C:\Documents and Settings\G097447\Bureau\MFK V2 LU 251 816 433A MF 3725 GB\PriseEnMains Gb.fm

Operation

Setting your

machine

Getting

started

DirectoryMaintenanceSafety ContentsInstallationPrint function

ACCESS TO FUNCTIONS

This section explains how to use the menu selection system. The MENU key on the operator

console allows you to use the menu to configure or adapt the printer environment, making settings

such as the number of copies to be made, the emulation, etc. depending on your own specific

needs. You can make these settings when the printer screen shows Ready.

Note: The printer applies the most recent settings sent from the application software or from the printer driver,

and these always take priority over any settings made from the operator console.

To navigate vertically within the functions, use the and keys (access the menu shown by

repeatedly pressing one of the keys).

To navigate horizontally within the functions, use the > and < keys. To change or confirm the

configuration of a component, press the ENTER key.

Printing out the menu guide

The list of menus may vary according to which options you have installed.

You can print out the print menu guide by moving within the menus as shown below.

MENU - - PRINT MENU STRUCTURE

 Press ENTER, a blinking "?" appears.

 Press ENTER again to start printing.

• Used in the same way as the > key in the mode selection function.

• Displays on-line help messages on the screen when there is a paper

jam:

If you press this key when the printer is

Ready : it displays explana-

tions about the on-line help messages.

If you press this key when the on-line help is displayed:

the on-line help is cancelled.

Confirms the numerical values and other selections.

Key Function