User manual

2-8
Getting started
Date en cours : 9 février 2005
C:\Documents and Settings\G097447\Bureau\MFK V2 LU 251 816 433A MF 3725 GB\PriseEnMains Gb.fm
PRINT CONSOLE NAVIGATION BASICS
NAVIGATING THE MENUS
Control panel keys
The keys on the console are used to configure the printer. Some keys also have secondary functions.
Note: Any settings made using these keys affect only the current interface.
GO
E N TE R
?
Key Function
• Connects and disconnects the printer.
• Prints and then ejects a page.
• Cancels specific errors.
• Cancels a print job.
• Reinitialises the numerical values or cancels a configuration procedure.
• Stops the alarm sound triggered by an error.
• If you press this key during mode selection: the configuration ends and
the printer returns to Ready.
• Selects the emulation, font and character encoding, in order to read a
CompactFlash card, etc.
Used to access a section or to enter numerical values. The > and < keys are
used to access or exit a subsection in some of the control procedures.
Used to access a section or to enter numerical values. The > and < keys are
used to access or exit a subsection in some of the control procedures.
Used in the same way as the < key in the mode selection function.
GO