User manual

7-18

Maintenance

Date en cours : 9 février 2005

C:\Documents and Settings\G097447\Bureau\MFK V2 LU 251 816 433A MF 3725 GB\MaintenanceGb.fm

- Disconnect the printer's developer connector (1) and pull on the unlocking lever (2), remove

the printer's developer (3). Close the developer's protective cover (4) and place the developer

into the plastic bag supplied (5).

- Place the printer into the box (8) carrying out the unpacking operations in reverse order (please

see the paragraph on Unpacking the printer, on page 1-7). Place the packing piece (7) as shown

in the illustration below, then install the toner cartridge (6) and the bin (9).

- Press on the centre of the packing piece as shown in the illustration below to make room for the

developer.