User manual

Print function
6-17
Date en cours : 9 février 2005
C:\Documents and Settings\G097447\Bureau\MFK V2 LU 251 816 433A MF 3725 GB\Fonction impression Gb.fm
Operation
Setting your
machine
Getting startedDirectoryMaintenanceSafety ContentsInstallationPrint function
 Select Interface > using the or keys.
The name of an interface appears underneath: this is the current interface.
Parallel (default)
USB
Optional (when a network card is installed).
 Press the ENTER key. A blinking question mark (?) appears.
 Select USB using the or keys.
 Press the ENTER key.
 Press the MENU key. The message Ready appears on the screen again.
Network interface settings
For further details, please see the paragraph Updating network settings, page 3-8.
CONFIGURING THE PRINTER
Page protection mode
The Page protection menu does not normally appear. However, if there is a printing error due to
a lack of memory on the printer, the Page protection menu will be forced to On. When this occurs,
reset the Page protection menu to Auto (default) to maintain the best possible use of the printer's
memory.
MENU - - PAGE SET - > - - PAGE PROTECTION
 Press ENTER, a blinking "?" appears on the left of the current status (on or off).
 Select the option (On, Off or Auto) using the [image] and [image] keys. Press ENTER.
Line break
This setting allows you to define what action the printer should take when it receives a line break.
MENU - - PAGE SET - > - - LF ACTION
 Press ENTER, a blinking "?" appears on the left of the current status.
 Choose one of the available options:
-O
NLY: a line break will be added,
- CR + LF: a carriage return and a line break will added,
-N
O EFFECT: the line break will be ignored
 Press ENTER.