User manual

6-16
Contents
Date en cours : 9 février 2005
C:\Documents and Settings\G097447\Bureau\MFK V2 LU 251 816 433A MF 3725 GB\Fonction impression Gb.fm
Draft mode
The "Draft mode" function allows you to reduce the amount of toner on the page in order to cut printing
costs. This function has no effect on printing speed.
MENU - - PRINT QUALITY - > - - DRAFT MODE
 Press ENTER, a blinking "?" appears.
 Select ON or OFF using the and keys. Press ENTER.
Resolution
Allows you to set the print resolution. The higher the resolution the sharper the printed characters and
graphics will be.
MENU - - PRINT QUALITY - > - - RESOLUTION
 Press ENTER, a blinking "?" appears.
 Select 1200 DPI, 600 DPI or 300 DPI using the and keys. Press ENTER.
INTERFACE
The printer has a parallel port and a USB port. A network card is also installed. You can independently
change the printing environment settings (such as the default emulation) on different interfaces using
the printer's menu selection system. Select the interface before making the changes described in the
procedure below.
Note: Selecting the interface as described below does not select the interface from which the data will be received.
Parallel interface
Warning - To ensure that your terminal works properly, you MUST retain the AUTO option for the
parallel interface settings.
USB Interface mode
 Press the MENU key.
Draft mode off (default)
Draft mode on