User manual

Print function
6-15
Date en cours : 9 février 2005
C:\Documents and Settings\G097447\Bureau\MFK V2 LU 251 816 433A MF 3725 GB\Fonction impression Gb.fm
Operation
Setting your
machine
Getting startedDirectoryMaintenanceSafety ContentsInstallationPrint function
KIR
The printer includes an antialiasing function (KIR). This function gives high print quality by
improving the resolution in software.
Note: Set the print density to 3 when you configure the KIR function. For more details about print density, please
see p. 6-19.
For the best possible KIR function settings, look at the check line, which is the last line on a status
page.
MENU - - PRINT QUALITY - > - - KIR MODE
 Press ENTER, a blinking "?" appears.
 Select ON or OFF using the and keys. Press ENTER.
KIR off KIR on
Q
KIR Test pattern ON
Memory
Installed Options
Network Status
Emulation
Toner Gauge
0
100
Interfaces
Hardware Information
Page Information
Error Log
STATUS PAGE
Firmware Version: Released:
Status page
Check line
Optimised stripes
The KIR configuration is the best.
Black vertical stripes
Set KIR mode to Off. Print the status page
out again. If there are still black stripes,
reduce the print density.
White vertical stripes
Set KIR mode to On. Print the status page out
again. If there are still white stripes, reduce the
print density.