User manual

Print function
6-9
Date en cours : 9 février 2005
C:\Documents and Settings\G097447\Bureau\MFK V2 LU 251 816 433A MF 3725 GB\Fonction impression Gb.fm
Operation
Setting your
machine
Getting startedDirectoryMaintenanceSafety ContentsInstallationPrint function
MENU - - PAPER HANDLING - > - - TYPE ADJUST
 Press ENTER, a blinking "?" appears.
 Press the and keys to choose the desired type. The following types are available:
 Press ENTER.
 Press > to set the paper weight, please see the paragraph Selecting the paper weight,
page 6-9.
Selecting the paper weight
You can configure the paper weight to customise your paper type.
MENU - - PAPER HANDLING - > - - TYPE ADJUST > PAPER WEIGHT
 Press ENTER, a blinking "?" appears.
 Press the and keys to choose the desired type. The following types are available:
 Press ENTER.
Note: If the paper type is specific and the front/back module is installed, you must choose whether or not to
allow front/back printing, please see the paragraph Switching the "Duplex path" on and off, page 6-10.
• Normal • Transparent • Pre-printed • Labels
• Bound • Recycled • Vellum • Rough
• Header • Colour • Perforated • Envelope
• Card • Thick • High quality • Specific (1 to 8)
• Light • Normal 1 • Normal 2 • Normal 3
• Heavy 1 • Heavy 2 • Heavy 3 • Very heavy