User manual
6-6
Maintenance
Date en cours : 28 août 2002
+ Press OK on the scanner keypad. The display shows:
+ Insert chip card (supplied with the toner cartridge) into the card reader ensuring that the chip is
entered as shown in the drawing below
+ The following is displayed on the scanner control panel screen:
+ Press OK
+ Once the chip card has been read, the display shows:
+ Remove the card
Caution - If the following is displayed, check that you have inserted the chip card the right way up:
5HSODFLQJWKHGUXPFDUWULGJH
To replace the drum cartridge, proceed as shown below:
When the display shows:
TUE 02 APR 13:39
INSERT GAUGECARD
CHANGE TONER ?
YES= OK - NO= C
TONER OK
REMOVE CARD
CANNOT READ CARD
REMOVE CARD
CHANGE DRUM
<OK> TO CONFIRM
MFL 251153211A_MF34 Sagem Gb.book Page 6 Mercredi, 28. août 2002 4:30 16