User manual

Operation
5-11
Operation Setting your
machine
Getting startedDirectoryMaintenanceSafety ContentsInstallation
Date en cours : 28 août 2002
6FDQQHUVHWWLQJV
5HVROXWLRQ
+
Set the desired resolution FAST, QUALITY or PHOTO with keys 5 or 6
+ Confirm your setting by pressing key OK
=RRP
Your fax offers to reduce or magnify a specific part of a document from 25 % to 400 %.
+ Enter the desired zoom value with the numerical keypad (ZOOMING)
+ Confirm your setting by pressing key OK
$VVHPEO\
+
Choose the copy type between ASSEMBLED or NOT ASSEMBLED
+ Confirm your choice by pressing key OK
2ULJLQ
If you wish, you can change the origin of the scanner.
By entering new values of X and Y given in mm (X < 210 and Y < 286), you will move the
scanning zone as shown on the figure below.
+ Select the X and Y coordinates with keys 5 or 6
+
Set the required coordinates with the numeric keypad or 5 or 6
+
Confirm your setting by pressing key OK
&RQWUDVW
+
Set the desired contrast with keys 5 or 6
+
Confirm your setting by pressing key OK
/XPLQRVLW\
+
Set the desired luminosity with keys 5 or 6
+
Confirm your setting by pressing key OK
scanned area
Top view: scanned side down
y
x
TOP OF SHEET END OF SHEET
MFL 251153211A_MF34 Sagem Gb.book Page 11 Mercredi, 28. août 2002 4:30 16