User manual

5-10
Operation
Date en cours : 28 août 2002
+ Choose the copy output type between COPY ASSEMBLED or NOT ASSEMBLED and press OK
to confirm
+ Set the required origin values with keys 5 or 6the numerical keypad and press OK to confirm
+ Set the required contrast value with keys 5 or 6 and press OK to confirm
+ Set the required brightness value with keys 5 or 6and press OK to confirm
+ Choose the type of paper NORMAL PAPER, THICK with keys 5 or 6 and press OK to confirm
+ Choose the paper tray, AUTOMATIC TRAY, UPPER TRAY or LOWER TRAY with keys 5 or 6
and press OK to confirm
63(&,),&&23<6(77,1*6
When the copy quality is no longer satisfactory, you can perform a calibration. To do so, refer to
paragraph Scanner calibration, page 6-15.
Moreover, a high number of controls let you improve the copy quality.
Scanner settings
•
RESOLUTION to set the photocopy resolutation
•
ZOOM settings to reduce or magnify any portion of a document by choosing the origin and value
of the zoom to apply to that portion
• The assembly parameter to choose between
ASSEMBLED or NOT ASSEMBLED copies
•The
ORIGIN parameter to choose the origin to be applied to the document
•
CONTRAST to choose the photocopy contrast
•
BRIGHTNESS is used to make your original document lighter or darker
•
L/R MARGINS to shift the margins or your original document to the left or to the right
Printer settings
•
PAPER is used to tell your machine what type of paper you use by default
•
TRAY is used to tell your machine which paper tray shoud be used by default
•
L/R MARGINS to shift the margins of your document to the left or to the right
Caution - All the settings performed through this menu will become the machine's default settings.
To access to the settings:
M 84 OK - ADVANCED FCT / SCAN. & PRINT
+ Select the SCANNER or the PRINTER to be set and press OK to confirm
+ Use the keys 5 or 6 of the navigator to scroll the described hereafter settings you want to
modify
MFL 251153211A_MF34 Sagem Gb.book Page 10 Mercredi, 28. août 2002 4:30 16