User manual

5-4
Operation
Date en cours : 28 août 2002
75$160,66,2129(57+(38%/,&6:,7&+('7(/(3+21(
1(7:25.3671
,PPHGLDWHWUDQVPLVVLRQ
+ Position the document (refer to paragraph Document positioning, page ?-1)
+ Enter the fax number or choose your dialling mode (refer to paragraph Dialling, page ?-1) then
press
The "Line" icon flashes during the call phase, it stays lit when both faxes are in communication
+ At the end of transmission the initial screen is displayed
'HOD\HGWUDQVPLVVLRQ
This function allows you to transmit a document at a later time.
To program a postponed transmission you need to identify the subscriber number, transmission time,
feeder type and number of pages.
To delay the transmission time of your document :
+ Position the document (refer to paragraph Document positioning, page ?-1)
+ Select M 31 OK - FAX / TRANSMISSION
+ Enter the subscriber number you wish to program at a different time or choose your dialling
mode (refer to paragraph Dialling, page ?-1) and confirm with OK
+ Next to the current time, enter the new time and confirm with OK
+ Adjust the contrast and confirm by pressing the OK key
+ Select the feed type, FEEDER or MEMORY and confirm with OK (refer to paragraph Document
feed type, page 3-4)
+ You may enter the number of pages before transmission and confirm with OK
+ Confirm postponed transmission by pressing key
Your document is stored and will be sent at the new time.
7UDQVPLVVLRQZLWKDXWRUHGLDO
This function allows you to monitor the dialling operation during a fax transmission. In this case, the
maximum transmission rate will be 14400 bps.
This function allows for example:
• to hear if the subscriber’s fax is engaged and if so, choose the moment when the line is clear to
start the document transmission
• to control the communication progress in case of uncertain numbers, etc
MFL 251153211A_MF34 Sagem Gb.book Page 4 Mercredi, 28. août 2002 4:30 16