User manual

Service · Changing the Toner Cartridge ¦ 69
EN
7. Place the toner cartridge into your device. The cartridge should snap securely into posi-
tion.
8. Close the cover. Make sure that the cover snaps securely into position on both sides.
9.
NEW CARTRIDGE? appears on the display. Confirm with OK.
10. Wait until
INSERTCARD appears on the display. Push the Plug’n’Print card of the new
toner cartridge into the opening on the left side next to the paper tray, with the contacts
facing to the left.
11. It may take a moment to update the cartridge. When the process is completed, the fol-
lowing appears on the display:
ACTION COMPLETED / EJECT CARD.
DANGER!
Escaping Toner Dust!
Once you have removed the protection strip, do not shake the toner cartridge
any more. Otherwise, it is possible that toner dust will be released into the air.
Notice
Error Message Plug’n’Print Card
Should the error message
UNREADABLECARD appear on the display, you
may have inserted the Plug’n’Print card incorrectly. The contacts must face to
the left as you insert the card into the device.