User manual

58 ¦ Settings · Set Resolution
EN
4. Enter the four-digit PIN code.
5. Confirm with OK.
6. Using [ select
ONLY DIRECT..
7. Confirm with OK.
Set Resolution
Modifying the Basic Settings
1. Press OK, 16 and OK.
2. Using [ select
RESOLUTION.
3. Confirm with OK.
4. Select the desired resolution using [.
NORMAL—For documents without special features
FINE—For documents with small print or drawings
SFINE—For documents with many details
PHOTO—For photos
5. Confirm with OK.
Reducing Transmission Speed
Reducing Transmission Speed
The device adapts the transmission speed to the line quality. This may take some time, espe-
cially for overseas connections. Set a lower transmission speed if you are sending faxes into
networks with poor line quality.
1. Press OK, 21 and OK.
2. Select the desired speed using [.
3. Confirm with OK.
Turning Page Header On/Off
Page Header
Your name and number appear in the page header of each fax transmission. If you do not
wish to send out your information, you can turn this function off.
1. Press OK, 16 and OK.
2. Using [ select
TX HEADER.
3. Confirm with OK.
4. Use [ to select whether you would like to turn the function on or off.
5. Confirm with OK.
Notice
Modifying the Basic Settings
The changed settings are stored as new default settings. If you select a special func-
tion for a one-time process, take care to restore the default settings or factory set-
tings after that.