User manual

Settings · Energy Saving Mode ¦ 55
EN
Settings 8
Help 5 · Settings
Cursor Navigation 6
Energy Saving Mode
Energy Saving Mode
Your device switches into the energy saving mode by default. It is not necessary for you to
set the device to this mode. Whenever you receive a fax or if you would like to print or make
a copy, your device will automatically switch back from its energy saving mode to its operat-
ing mode.
Selecting the Country
Setting the Country Correctly
1. Press OK, 11 and OK.
2. Use [ to select the country in which you are operating the device.
3. Confirm with OK.
Selecting the Language
1. Press OK, 12 and OK.
2. Use [ to select the desired display language.
3. Confirm with OK.
Notice
Prints the List of Settings
Press ¨, 5 and OK to print a list of all settings of your device.
Notice
Navigating in the Menu
You can move the cursor using [. Press C to return to the previous menu level.
Press j to close the menu and return to the starting mode.
CAUTION!
Setting the Country Correctly!
You must set the country in which you are operating the device. Otherwise your de-
vice is not adapted to the telephone network. If your country is not included in the
list, you must select a different setting and use the correct telephone cable for the
country. Consult your retailer.