User manual

38 ¦ Fax · Sending a Fax

1. Insert the documents face down into the document feeder. The lower most document

will be fed in first. You can insert up to 20 documents (80¦g/m²) at a time.

2. Push the document guide inwards, so that it lies level on the documents.

3. Set the desired resolution. You can choose between NORMAL (for documents without

special features), h/FINE (for texts with small print or drawings), f/SFINE (for docu-

ments with many details) und x/PHOTO (for photos). Press fx. The symbol of the

selected resolution appears in the display.

4. Dial the desired number. There are several ways to do this:

5. Press o.

Manual Dialling: Dial the desired number using the numeric keypad.

Notice

Cancel Transmission

Press j to eject the documents without sending them.

Notice

Default Resolution Setting

With function 16, you can select the default resolution setting (also see chap-

ter Set Resolution, page 58).

Notice

Automatic Redial

If the subscriber is busy, the device dials the number again after some time.

Press j, in order to cancel the transmission process. After the transmission, the

device prints out a transmission report depending on the settings.