User manual

24 ¦ Initial Operation · Attaching the Document Support

Attaching the Document Support

Insert the document support into the two openings in the cover. The document support

should snap securely into place.

Dokumentenhalter anbringen

Loading Paper

Requireme nts

Before you can receive documents or make copies, you must load paper into the device.

Please use only appropriate paper in standard format A4 · 210¦×¦297 millimetre ·

preferably80¦g/m

. Follow the specifications in the technical data.

Loading Paper

Preparing Paper

1. Remove the cover from the paper tray.

2. Put in only as much paper as will fit under the raised limit markers on the upper edge of

the paper tray (see also the drawings on the cover of the paper tray). You can load up

to 250 sheets.

Notice

Loading Paper

Separate the paper sheets by fanning them out, then align them by tapping edge

of the stack lightly against a flat surface. This will prevent several sheets of paper

from being drawn in all at once.

CAUTION!

Initial Operation!

Please remove the protective cardboard from the paper tray before loading pa-

per and replacing the paper tray into the device.