Operation Manual

9
EN
4. The screen displays Repeat. Select the alarm repetition frequency:
 Once: the alarm will sound at the set time on the required day, or
 Once: the alarm will sound at the set time every day.
5. Select the Source to sound when the alarm goes off:
 if you choose FM, AM, SW, LW, select a radio station,
 if you choose Bip, select the required tone, then the volume to apply (from 1 to
10) and confirm.
The icon is displayed on the screen.
PROGRAMMING THE AUTOMATIC SLEEP FUNCTION
You can set your radio to switch off automatically after a certain time, when listening to
the radio for example.
In the Standby menu, select the period required, from 10 to 90 minutes.
The screen displays the rime remaining before the radio switches off.
RESETTING THE RADIO
If necessary, you can reset the radio to its initial settings.
In the Configuration > Initial configuration menu, select Yes and confirm. Now the
radio is on factory settings.
CHANGING THE DISPLAY LANGUAGE
In the Configuration > Language menu, select the desired language and confirm. The
messages are displayed in the chosen language.
CHANGING THE TIME DISPLAY
The time is displayed in the format HH:MM
1. In the menu Configuration > Time, set the time:
 turn the knob to reach the desired time,
 press the knob to confirm the time displayed.
Thus, first define the hours, then the minutes.
2. Confirm at each stage.
The set time is displayed on the screen.
To remove the automatic sleep function, select the Off option and confirm.
If you reset the radio, you will lose your personal settings.
Liasse EN.fm Page 9 Jeudi, 5. mai 2011 12:34 12