Operation Manual

4 - Installation in Mac OS X
SAGEM F@st™ 908/948 Reference Manual - USB Interface – 288 055 881 - 01
Page 4-8 Reproduction and communication prohibited without written permission of E
If you checked the "Show status in menu bar" box (see step 5), you can also proceed
as follows:
Click the connection icon
located in the menu bar.
Select Disconnect.
4.2.2 DHCP connection mode
1
Click the
(apple) menu in the
menu bar, select "System
Preferences", then click the "Network"
icon.
The screen opposite appears.
The Location: field should contain
ADS USB Routed IP.
The Show: field should contain
Ethernet adapter.
2 Select the TCP/IP tab and the relevant panel appears.
3 The Configure: field should contain Using DHCP by default. If not, select this setting from
the drop-down list.
Note: If the Using PPP setting is displayed, select the PPPoE tab then uncheck the
Connect using PPPoE box.
4 Click Apply Now to confirm connection in DHCP mode.
Note: The DHCP client, Domain name servers and Search domains fields are
optional.