Operation Manual

4 - Installation in Mac OS X
SAGEM F@st™ 908/948 Reference Manual - USB Interface – 288 055 881 - 01
Page 4-6 Reproduction and communication prohibited without written permission of E
7
If you want:
- Check the "Save password" box for subsequent users.
- Check the "Show PPPoE status in menu bar" box (recommended).
8
Click
to register your input.
When you connect for the first time, you must follow the procedure described
above. When connecting subsequently, you will simply set up the Internet
connection by following steps 9 to 11 below.
9
In the desktop, double click the icon representing your Max OS X hard disk. Open the
Applications folder then double click the connection icon:
(see note).
10
The screen opposite appears.
Check that the Configuration: field
contains "Ethernet adapter (in x)", in
other words the board corresponding
to your modem. If not, select it from
the drop-down list.
Check that the information contained
in the "Configuration", "Name" and
"Password" fields is correct.
Click
to set up the
connection.
Note: If the connection is not set up,
it may be that you have entered the
name or password incorrectly. In this
case, click the
button to
correct the error.
Note: In Mac OS 10.1, the connection icon is as follows:
11
Open your browser and access the Internet.