Operation Manual

3 - Installation in Mac OS 8.6 or Mac OS 9.x
SAGEM F@st™ 908/948 Reference Manual - USB Interface – 288 055 881 - 01
Page 3-8 Reproduction and communication prohibited without written permission of E
3.3 SAGEM F@st
TM
908/948 modem status
3.3.1 Checking installation of the SAGEM F@st
TM
908/948
1 Click the Remote access icon in the
settings bar at the bottom of the desktop
to display a list of the commands inherent
in this icon.
Click Open Remote Access.
2 Click on the Remote access menu in the
menu bar at the top of the desktop to
display the list of commands inherent in
this menu.
Click the Modem command.
The "Connect via" field should contain:
ADSL USB Modem.
In the Setup area, the "Modem" field
should contain the name of your modem:
ADSL USB Modem
If not, to modify the greyed out (not modifiable) fields, proceed as follows:
- In the menu bar, select Remote Access / Modem; a window appears and the menu bar is
modified.
- In the new menu bar, select File / Configurations, a window appears.
- In the pop-up list, select "Default" then click the "make Active" button.
You can now select ADSL USB Modem in the drop-down lists of the Connect via and
Modem fields.