Operation Manual

3 - Installation in Mac OS 8.6 or Mac OS 9.x
SAGEM F@st™ 908/948 Reference Manual - USB Interface – 288 055 881 – 01
Reproduction and communication prohibited without written permission of E Page 3-7
Note: To confirm that the procedure has been successful, select Open Remote Access
an the Remote Access screen appears. This screen should show the "Idle" state and
contain the
button.
3.2.2 DHCP connection mode
1
In the menu bar, select Apple / Control
Panel / TCP/IP; the following screen
appears.
Note: The Connect via: and Configure: fields should respectively contain ADSL
USB Modem xxx and Using DHCP Server.
If not, modify the Connect via: field, proceed as follows:
¾ In the menu bar, select Apple / Control panel/ Modem; a window appears and the
menu bar is modified.
¾ In the new menu bar, select File / Configurations and a window appears.
¾ From the pop-up list, select "Default" then click "Make Active".
2
Open your browser and surf the Internet.