Operation Manual

2 - Installation in Microsoft Windows







SAGEM F@st™ 908/948 Reference Manual - USB Interface – 288 055 881 - 01

Page

2-6

Reproduction and communication prohibited without written permission of E

Disconnecting from the Internet

Double click the Internet ADSL icon on

your Windows desktop,

or right click on the Internet ADSL icon in

your Windows desktop,

or right click on the connection icon in the

Windows task bar.

You will be disconnected.

2.2.2 DHCP connection mode

To connect your computer (PC or Mac) operating in DHCP client mode via its USB interface to the

SAGEM F@st

908/948, you must correctly set up the computer. This configuration procedure

can be carried out regardless of the computer's operating system.

It entails assigning a public IP address to your computer (PC or Mac) by DHCP request.

In Windows



 XP, for example, proceed as follows:

1 ¾ Select Start / Control Panel.

In the corresponding screen

double click on Network

Connections, the screen

opposite appears.

¾ Select the local connection

that you want to use with the

SAGEM F@st

908/948 then

right click and select

Properties.