Operation Manual

2 - Installation in Microsoft Windows 


SAGEM F@st™ 908/948 Reference Manual - USB Interface – 288 055 881 - 01
Page 2-2 Reproduction and communication prohibited without written permission of E
2.1 Installing the SAGEM F@st
TM
908 / 948
!
It is vitally important to run the installation CD-ROM before connecting the USB
cable to your computer.
If a SAGEM F@st
TM
800 / 840 modem is already installed on your computer,
you have to uninstall it before installing your SAGEM F@st
TM
908 / 948 modem.
The procedures for installing, checking installation and uninstalling described
below have been carried out arbitrarily using Windows

 XP. There might be slight
differences when installing in other Windows operating systems (98, ME and
2000).
1
Insert the modem CD-ROM in the
appropriate drive on your
computer; the screen opposite
appears.
You can change the installation
language by clicking on this icon
(availability depending on
model).
Click on the USB connector to set
up your computer's USB
interface.
Note: If this screen does not appear, from the Start menu, select Run and
then enter: "<CD-ROM drive letter>:\autorun.exe" (for example
e:\autorun.exe) then click OK.
2
The screen opposite appears.
Select the country in which
located, from the list (availability
depending on model).
Choose your Internet Access
Provider from the proposed list .
If it is not shown, select «Other».