Installation Instructions

SAGEM F@st

908 / 948 Installation Guide

Contents

Pages

1. Overview of the SAGEM F@st™ 908 / 948 modems 5

1.1 Description 5

1.2 Choosing the connection interface 6

1.3 Contents of your ADSL pack 7

1.4 Prerequisites 8

2. Hardware installation 9

3. Installing the modem in Ethernet mode 11

3.1 Connecting the Ethernet interface 11

3.2 Installing the software 11

3.2.1 Encapsulation options in Ethernet mode (depending on versions) 12

4. Installing the modem in USB mode 13

4.1 Installation of the software 13

4.1.1 Encapsulation options in USB mode (depending on versions) 14

4.2 Connecting the USB interface 14

5. Problem solving 15

5.1 Interpreting LED indications 15

5.1.1 LEDs visible on the modem cover 15

5.1.2 "ETH" connector LEDs on the rear panel of the modem 15

5.2 Problem solving in Ethernet mode 16

5.2.1 No modem power supply 16

5.2.2 Modem not detected 16

5.2.3 Absence of ADSL synchronization 17

5.2.4 Internet connection not possible 18

5.3 Problem solving in USB mode 19

5.3.1 "ADSL" and "PWR" LEDs off 19

5.3.2 "ADSL" LED off and "PWR" LED on 19

5.3.3 "ADSL" LED on steady and "PWR" on 19

Appendix A - Safety instructions 21