Installation Instructions

SAGEM F@st
TM
908 / 948 Installation Guide
21
Appendix A - Safety instructions
Safety instructions
!
READ THE FOLLOWING
INSTRUCTIONS CAREFULLY
Environment
¾ The SAGEM F@st™ 908 / 948 must be installed and
used inside a building (for desktop use).
¾ The ambient temperature must not exceed 45°C.
¾ The SAGEM F@st™ 908 / 948 must not be exposed to
strong sunlight or to a strong heat source.
¾ The SAGEM F@st™ 908 / 948 must not be placed in an
environment subject to significant steam condensation.
¾ The SAGEM F@st™ 908 / 948 must not be exposed to
splashed water.
¾ The SAGEM F@st™ 908 / 948 must not be covered.
¾ The SAGEM F@st™ 908 / 948's mains adapter unit must
not be covered.
Maintenance
¾ Do not open the casing. This action is reserved only for
qualified personnel, approved by your operator.
¾ Cleaning: do not use liquid or aerosol-based cleaning
products.
Power source
¾ The SAGEM F@st™ 908 / 948 modem is supplied with
its own power supply unit. It must not be used with any
other adapter.
¾ This Class II adapter requires no earth. The connection
to the mains electricity supply must comply with the
instructions on its label.