Installation Instructions

SAGEM F@st
TM
908 / 948 Installation Guide
17
5.2.3 Absence of ADSL synchronization
Firstly check that the conditions in the previous section are satisfied.
LEDs Flag Status Corrective action
ADSL off
PWR on
Red
Modem detected
by your
computer.
ADSL not
synchronized
Check the connection of your ADSL splitters.
Each of your installation's telephone sockets
should be fitted with an ADSL splitter.
Check that the RJ11 type line lead supplied
with your modem is connected to one of your
sockets. It is best not to use any telephone
line extension.
Lastly, check with your IAP that the ADSL
service is available on your telephone line.