Installation Instructions

SAGEM F@st
TM
908 / 948 Installation Guide
16
5.2 Problem solving in Ethernet mode
5.2.1 No modem power supply
LEDs Flag Status Meaning
ADSL off
PWR off
Red
Modem not
powered
Check that the modem is receiving power
supply. Only the power supply unit supplied
with the modem should be used.
Check that your PSU's electrical
specifications are compatible with your mains
electricity network.
Lastly, uninstall then reinstall the BridgeMon
application.
Reminder: The SAGEM F@st™ 908 / 948 is powered only from a mains
adapter unit. It does not use the power supply provided by the USB interface.
5.2.2 Modem not detected
Firstly check that the conditions in the previous section are satisfied.
LEDs Flag Status Corrective action
ADSL off
PWR on
Red
Modem powered.
Modem not
detected by your
computer.
Check that the Ethernet cable supplied in
your pack is correctly connected to your
modem and to an active Ethernet port on your
computer. At both ends, you have Ethernet
detection LEDs. The Ethernet cable to be
used is a cross-pinned UTP RJ45 cable.