Installation Instructions

SAGEM F@st
TM
908 / 948 Installation Guide
15
5. Problem solving
5.1 Interpreting LED indications
5.1.1 LEDs visible on the modem cover
LED ADSL PWR
On steady
ADSL synchronized Modem powered up
Off
No ADSL sync Modem not powered
Blinking
Trying to set up ADSL
synchronization
Not applicable
5.1.2 "ETH" connector LEDs on the rear panel of the modem
LED Status Meaning
Left On Indicates that the connection is OK and that the link is set
up between the computer and the SAGEM F@st™ 908 /
948 modem
Off No connection
Right Blinking Traffic in progress (sending or receiving)