Installation Instructions

SAGEM F@st
TM
908 / 948 Installation Guide
11
3. Installing the modem in Ethernet mode
For more details on this installation procedure, refer to the SAGEM F@stTM
908 / 948 Ethernet Interface Reference Manual (see CD-ROM / Reference
Manual - Ethernet Interface).
3.1 Connecting the Ethernet interface
For this, use the cross-pinned
Ethernet cable supplied with your
modem.
When the modem is connected to your
computer, the Ethernet detection LEDs on your
modem and your Ethernet card will light.
3.2 Installing the software
In Windows XP, for example:
¾ Insert the CD-ROM of the
modem in your computer's
appropriate drive and the screen
opposite appears.
¾ Choose the installation
language, (availability
depending on model) by clicking
on the
icon.
¾ Click on the Ethernet socket.
Then, please comply with the
directions for use, given by the
installation software, shown on the
successive displays.