Installation Instructions

SAGEM F@st
TM
908 / 948 Installation Guide
10
2. Power up your modem
For this, use the power supply unit
supplied with your modem
2
When the modem is powered up, the
PWR LED lights.
3. Link your modem to your telephone line
The line lead supplied in your pack
should connect the modem to the
connector provided on your splitter or
to a telephone network adapter.
When the modem is linked to the
telephone line, ADSL
synchronization follows
automatically. The ADSL LED is
on permanently.
At this stage, you have made all the connections you need to use your ADSL
modem. All you now have to do is install the applications delivered with the
modem and set up your internet access.
2
The use of any other power supply unit will invalidate the manufacturer's warranty.